【讨论】一个工艺工程师的最因该具备的是什么? [复制链接]

你认为作为一个工艺工程师最应该具备的是什么？ SMT设备知识、SPC知识、QC知识、SixSigma... 欢迎你回帖讨论！

SMT工艺工程师

其职责是确定产品生产程序，编制工艺流程，参与新产品的开发，协助设计师做好PCB设计；熟悉元器件，PCB以及质量认证；熟悉焊膏，贴片胶工艺性能及评价；能现场处理生产中出现的问题，及时作好记录；掌握产品质量动态，对引起质量波动的原因进行分析，及时报告并提出质量部门的处理意见，监督生产线工艺的执行；负责组织产品的常规试验及其他试验；参与产品的开发研制工作，提出质量保证方案。

SMT是一项高技术，对人的素质要求高，不仅要技术熟练，还要重视产品质量，责任心强，专业应有明确分工（一技多能更好）。

当然，具备的知识当然是越多越好了。。。
大家认为如何。

同意3楼兄弟的意见，还要看自己的志愿来决定呢！

具备的知识在掌握最基本的一些之后，当然是越多越好了。
要有侧重点！

生产线的痛苦就是我的痛苦,
我没有足够的时间来做PP我们一天要做2个新的型号,我要做作业指导书,定工艺参数,做网板,做波峰焊夹具,分析不良情况,维护一些通用工具,~~~
我肚子饿了,就13:00了,天黑了,就下班了,我要逃出着恐怖的EMS~~

哇,ASPE這麼辛苦喔!!!:eek:
人間地獄啊.:rolleyes:

SMT的涉及到许多学科,如金属学,材料学,热工学等,但是对于工厂里的工程师来说,根本没有机会做研究

哎...我也是啊，由于公司不大，产品多的要命，关键产量小，一次最多做500套的产品，你们说我能怎么搞工艺，而且设计部门设计出来的PCB可生产性不好，还要我们工艺部克服。。。。大家有什么好办法吗？

[QUOTE]最初由 zhen_24 发表
[B]设计部门设计出来的PCB可生产性不好，还要我们工艺部克服。。。。大家有什么好办法吗？ [/B][/QUOTE]

这个很明显嘛，你们的可制造制造性设计DFM没做好，产品在设计阶段，制造部门，以及你们的工艺部门都应该有人去参加项目小组，对设计出来的产品就生产，工艺等过程是否可行做出评审提出相关建议等，利于以后的生产。

参考一下，不完善的要求：
Basic
1.What is the required qualifications?
2.Do you know the machine specification in the factory?

Manufacturing method
1.Do you have a basic soldering knowledge?
2.Do you have a knowledge of related solder paste?
3.Do you know a reflow temperature condition out line?
4.Do you know a narrow space with other component, narrow pitch SAD mounting?
5.Do you know a epoxy resin out line?
6.Do you know the bare chip joint out line?
7.Do you know below inspections?
a. Appearance inspection
b. Solder paste printing inspection
c. X-ray inspection
8.Do you know the knowledge of below PCBs?
a. ALIVE PCB
b. Glass-epoxy PCB
c. Flexible PCB
9.Do you know below components out line?
a. Very small chip
b. BGA
c. Can shield
d. Connectors

Design
1.Do you know the PCB design standard out line?
2.Do you know the PCB design standard flow?
3.Do you know below words?
a. Mirror PCB
b. PCB biscuit
c. Perforation
4.Do you understand the SMT design?
a. Narrow pitch soldering engineering.
b. Absolver paste physicality and control.
c. Metal mask design.
d. Reflow heat conduction characteristic.
e. Solder paste printing engineering.
f. PCB design rule.
g. PCB material temperature characteristic.
h. Soldering strength.
i. Environment characteristic and control of moisture resistance.
j. SMT data control.
k. DFM engineering.
l. Line balance (efficiency) approach.
m. Flux.
n. SMT quality reference index understanding.
5.Do you design the support jigs?
6.Do you design the Special nozzle?

Facilities
1.Do you understand SMT facilities?
a. Carrying machine.
b. Solder paste printing machine.
c. Conveyer.
d. Oven.
e. Counterturn machine.
f. Chip mounter.
g. Inspection machine.
h. Applicator.
i. AOI
j. Temperature control.
k. Static electricity control
2.Do you read a machine drawing?
3.Do you have a knowledge of metal material?
4.Do you have a knowledge of mounting data?
5.Do you know the reflow oven out line?
6.Do you know the solder screen mask out line?

Production
1.Do you have the quality improvement conscious mind?
2.Do you have the cost conscious mind?
3.Can you make a SMT mounting working specification?
4.Do you know the SMT process controlled materials out line?
5.Do you know PCB/component handling out line?
6.Do you know below items for environment?
a. Static electricity
b. Dust (Clean room)

Analyze
1.Do you understand the SMT analysis engineering?
a. Visual engineering.
b. Analysis equipment.
c. Electrical analysis method.

[QUOTE]最初由 john97 发表
[B]参考一下，不完善的要求：
Basic
1.What is the required qualifications?
2.Do you know the machine specification in the factory?

Manufacturing method
1.Do you have a basic soldering knowledge?
2.... [/B][/QUOTE]
不愧是SuperMod, 大家仔细研究吧,我们的工艺论坛将对这些东西进行讨论!

初来乍到，学到了不少东西。原来还真不知道有这么好的专业网站。各位老师多指教了。:em02

12楼不愧是supermod,所列条理清晰具体，受益不少。不知道有多少兄弟能掌握这么多？

作为一个工艺工程师，相关知识了解得越多越深当然越好。可是如果自己公司没有生产过的东西，对其相关知识了解的深度和广度肯定与行家差得很远。这么多不断更新的东西要想精通，恐怕不行。我们这样埋头苦干工程师多累呀！
在同时接触到新专案新问题时，我更关心的如何能够比别人快一些掌握相关知识。要是能组织大家一起协同工作，肯定比一个人干省时省力。

引用第7楼lusac于2004-05-12 16:06发表的  :
用户被禁言,该主题自动屏蔽!

呵呵,支持.